Filaments

  • Techna CarbLoaded PET – 500g

    0 out of 5
    Take our PET-G, mix in 20% by weight carbon fibre and you you get a CarbLoaded PET. This pooch is no handbag pooch at all! Abrasive to standard nozzles but toughness and stiffness to beat a fair few well known names in the business. Prints nicely at typical PET-G temperatures and due to the low thermal expansion coefficient, can be printed at low bed temperatures too!Combine this with the Olsson ruby of your choice and never worry about worn nozzles againNew 1.75mm stock  arriving January 2019
    £29.17 £25.00
  • Techna PET-G 1.75mm Filament – 750g

    0 out of 5
    Our most versatile engineering filament is arguably the Techna PET-G 1.75mm filament. As it is amorphous by nature, PET-G has an almost transparent look with can translate nicely if care is paid to the extrusion temperature. Our PET-G offers reliable printing with good mechanical properties so you can expect the benefits of printing with both PLA and ABS rolled into one cool spool! Check out the colours below!
    £23.33
  • Techna Crystal Clear Filament – 500g

    0 out of 5
    The Techna Crystal clear Filament is special. Firstly it prints transparent to translucent. Secondly it is food contact approved, thirdly it does not craze when stressed. Wonder what you would print with this lovely material.
    £16.67£22.50
  • Techna PolyCarbonate Filament Clear – 500g

    5.00 out of 5
    Techna Polycarbonate Filament is another one of our must try materials. Balances of toughness, dimensional stability, optical clarity, high heat resistance and excellent electrical resistance. Resistant to temperatures up to 114C and also score low on the flammability tests too! This is definitely an advance material but if you need it, you need it!
    £20.83
  • Techna PET-G 2.85mm Filament – 750g

    5.00 out of 5
    Our most versatile engineering filament is arguably the Techna PET-G 2.85mm filament. As it is amorphous by nature, PET-G has an almost transparent look with can translate nicely if care is paid to the extrusion temperature. Our PET-G offers reliable printing with good mechanical properties so you can expect the benefits of printing with both PLA and ABS rolled into one cool spool! Check out the colours below!
    £23.33 £18.33