Bondtech CR-10s Direct Drive Upgrade kit – Creality
£100.00
Select Currency:The Bondtech CR-10s Direct Drive Upgrade kit is the one you have be waiting for.
Bondtech’s unique Dual-Drive technology in the BMG extruder, combined with a genuine E3Ds v6 HotEnd gives you a problem free material feeding and enables the use of a wide range of materials.
The housing parts are printed with PA12 (polyamide) for maximum strength and precision using industrial grade SLS technology.
- Description
- Additional information
- Reviews (0)
- EAN/GTIN
Description
Bondtech’s Direct Drive System (DDS) for CR-10S is designed to give the user more options – different materials; higher flow and/or wider nozzles; thinner layers – and achieve a higher print quality. The DDS includes an integrated BMG (Bondtech Mini Geared) extruder featuring our unique Dual-Drive technology and an E3D’s well known V6 All-Metal HotEnd. The DDS housing design provides an effective Hot-End cooling. With the 3:1 gearing ratio, high resolution prints with small nozzles or high flow prints with bigger nozzles can be used. For ease of use the system is ready to plug in once mounted on your printer. No extra cabling work and soldering is necessary.
The filament sensor holder has been reworked and is using a steel ball to allow the filament to pass the sensor in both directions.
The extruder design is inspired on Greg3D’s “The Tank” Check out his work here: https://www.thingiverse.com/Greg191134/about.
This all-in-one solution is easy to install and ready to use. Bondtech’s DDS uses our unique Dual-Drive technology with an internal gear ratio of 3:1 and 415 steps per mm. Our DDS also uses an E3D’s V6 HotEnd that allows to easily print a wide range of filaments from the market with less stringing and clogging with processing temperatures up to 285°C.
Study and test was put on the design of the housing as well. Its geometry allows for effective cooling of the HotEnd by perfecting the placement of the Sunon 4010 axial fan and the orientation of the cool air flow. Along the cooling of the HotEnd, we also achieved a more effective part cooling by using a Sunon 5015 Radial Fan and a fan shroud that focus the air flow right to the tip of the nozzle. The filament sensor housing was also redesigned. You can now properly attach it to the CR-10S with a strong grip. The steel ball we placed below the lever on the filament path, lets you feed material in booth directions, during loading and unloading. Much work was put on the power cables management and setup. Everything is ready to plug-in. No need to cut or solder. The old cables and components required to be removed, will remain intact and able to be reused.
This all-in-one solution is easy to install and ready to use. Bondtech’s DDS uses the unique Dual-Drive technology with an internal gear ratio of 3:1 and 415 steps per mm. Our DDS also uses an E3D’s V6 HotEnd that allows to easily print a wide range of filaments from the market with less stringing and clogging with processing temperatures up to 285°C.
Study and test was put on the design of the housing as well. Its geometry allows for effective cooling of the HotEnd by perfecting the placement of the Sunon 4010 axial fan and the orientation of the cool air flow. Along the cooling of the HotEnd, we also achieved a more effective part cooling by using a Sunon 5015 Radial Fan and a fan shroud that focus the air flow right to the tip of the nozzle. The filament sensor housing was also redesigned. You can now properly attach it to the CR-10S with a strong grip. The steel ball we placed below the lever on the filament path, lets you feed material in booth directions, during loading and unloading. Much work was put on the power cables management and setup. Everything is ready to plug-in. No need to cut or solder. The old cables and components required to be removed, will remain intact and able to be reused.
Whats in the Box?
How do I install it?
Additional information
| Weight | .5 kg |
|---|---|
| Dimensions | 15.3 × 11.5 × 11.5 cm |
| 3DPrinting Process | FDM/FFF |
| Kit for | Creality CR-10 |
Be the first to review “Bondtech CR-10s Direct Drive Upgrade kit – Creality”
You must be logged in to post a review.
7350011410606
Reviews
There are no reviews yet.