The Creality CR-10S has evolved around the tried and tester i3-style frame and benefits from a heated print bed as every self respecting 3D Printer should.
Control of the printer is done through the typical LCD screen and knob combination while gcode is transfered via SD-card or USB. Compatibility of course is not an issue since the CR-10 and CR-10S are fully compatible with Cura, Simplify3D, Craftware, KiSSicler, Slic3R and all the others too.
It goes without saying that all our 1.75mm materials are also compatible with the CR-10S but you may not want to run Real Heavy Metal or Carbloaded PET through the brass nozzles.
The machine comes in a kit form. This means you will need to get your allen key set out to finish putting it together, but should be running within 10 minutes.
The Cr-10S also incorporates a filament sensor that could save many a print especially on larger volume prints. If the filament runs out (or snaps), it will alarm and stop, continuing when more is fed in.
The newer versions also run on dual Z axis lead screws in order to ensure correct vertical translation of the gantry.
Be sure to select one of the three sizes of CR-10s that suits you needs as they come in:
- and a whopping 500mmx500mmx500mm!
As mentioned above, you can upgrade this machine with the specific Bondtech kit that can be added to your cart by clicking below