Techna CarbLoaded PET – 500g
Select Currency:£20.83 – £25.00
Take our PET-G, mix in 20% by weight carbon fibre and you you get a CarbLoaded PET. This pooch is no handbag pooch at all! Abrasive to standard nozzles but toughness and stiffness to beat a fair few well known names in the business. Prints nicely at typical PET-G temperatures and due to the low thermal expansion coefficient, can be printed at low bed temperatures too!
Combine this with the Olsson ruby of your choice and never worry about worn nozzles again
- Description
- Additional information
- Reviews (0)
Description
Take our PET-G, mix in 20% by weight carbon fibre and you you get a CarbLoaded PET. This pooch is no handbag pooch at all! Abrasive to standard nozzles but toughness and stiffness to beat a fair few well known names in the business. Prints nicely at typical PET-G temperatures and due to the low thermal expansion coefficient, can be printed at low bed temperatures too!
If you own a BCN3D Sigma, you may want to consider upgrading the hotend kit to make changing nozzles easier. Take a look at our hotend conversion kit.
Here is a review we got from the team over at http://www.inov3d.net/
The got a spool to print with for review and lent us their Open RC F1 model to display at the 2018 TCT exhibition.
Additional information
Weight | 0.850 kg |
---|---|
Dimensions | 20 × 22 × 6 cm |
Filament diameter | 1.75mm, 2.85mm |
Material Base | Carbloaded, PET-G |
Material properties | Chemical Resistance, Easy Print, Humidity tolerant, Stiffness, Toughness, Translucent |
Be the first to review “Techna CarbLoaded PET – 500g”
You must be logged in to post a review.
Reviews
There are no reviews yet.