Techna PolyCarbonate Filament Clear – 500g
£12.50
Select Currency:Techna Polycarbonate Filament is another one of our must try materials. Balances of toughness, dimensional stability, optical clarity, high heat resistance and excellent electrical resistance. Resistant to temperatures up to 114C and also score low on the flammability tests too! This is definitely an advance material but if you need it, you need it!
- Description
- Additional information
- Reviews (1)
Description
Tough, durable and very pretty, Techna PolyCarb, our own polycarbonate filament has it all. A filament for those with some serious heating capacity on their printer. Will require a nozzle temperature of 270-290C and a bed temperature of approximately 110C.
An enclosure would be nice on this chappy.
For best adhesion to your build plate we of course recommend the use of Dimafix
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 20 × 22 × 6 cm |
| Filament diameter | 1.75mm, 2.85mm |
| Material Base | Polycarbonate |
| Material properties | Chemical Resistance, Stiffness, Toughness, Translucent |
1 review for Techna PolyCarbonate Filament Clear – 500g
Add a review
You must be logged in to post a review.
Christopher Lee (verified owner) –
Wow this stuff is good… Took a few attempts to get printing but once dialed in its been excellent. Printed some printer parts that need high temps and took all my weight to make them fail. Printing at about 40mms for me gave the best results so far, 280c and 120 bed. Adhesion to bed is a challenge but using an enclosure and dimafix has helped.