3D Printer Upgrades

  • Bondtech Kit for BCN3D Sigma

    5.00 out of 5
    Own a BCN3D Sigma?Well, now for your convenience, we are offering a Bondtech kit for BCN3D Sigma! The kit includes two extruders (a left hand and a right hand), cables for plug and play and also our own design of mounting hardware. See twitter for ideas on how our friends have used them, or head on over to our blog postThe Kit includes 2 extruders, 2 cables specially made to suit the BCN3D Sigma and of course our own special design of extruder mounting hardware.Get the installation manual here!
    £291.67 £250.00
  • Raise3D Bondtech upgrade kit – DualDirect upgrade

    5.00 out of 5
    If there is one upgrade to do to any Raise3D printer, it is to change the extruders to Bondtech. Now even better than ever we offer you the new and improved dual extruding Raise3D Bondtech upgrade kit, the Bondtech DualDirect! A very effective twin splicing of two little BMG extruders with their super 3:1 reduction, lower weight and of course effective Bondtech signature DualDrive extruder gears. Raise3D Bondtech upgrade kit
    £179.17 £165.83
  • Mosquito MAGNUM Hotend 1.75mm – Slice Engineering

    0 out of 5

    In Stock!

    The Mosquito Magnum Hotend gives you the same output as the Volcano type hotends but in a much smaller envelope. Capable of going up to 450C it really pushes the boundaries of 3D printing.
    £154.17
  • Bondtech Extruder kit for Raise3D N2 Hybrid

    0 out of 5
    Please be advised, we will not be restocking this kitA much improved and significantly better kit is the Raise3D Dual Direct kitMajor newcomer to the market with some fantastic options, Raise3D, could still benefit from a professionally designed extruding mechanism. We thus offer owners of all Raise3D printers the option of the Bondtech Dual-Drive extruder!Kit contains everything needed to get your printer working reliably and quickly.
    £145.83
  • Ultimaker 2 and 2+ Bondtech kit

    0 out of 5
    By popular demand, as with many of our products, we are now offering the full Ultimaker 2 and 2+ Bondtech kitThe kit contains all the parts you will need to get your Ultimaker 2 and 2+ printing without grinding even on the most demanding of prints.Delivery of these will be at a slightly longer lead time as we produce the parts to order.
    £137.50
  • Bondtech QR 1.75 mm Universal DualDrive extruder

    0 out of 5
    For professionals and demanding hobbyists alike, the Bondtech QR 1.75 mm DualDrive extruder is the one of the best upgrades you can do to your printer. No more underextrusion due to slipping filament! This one is for the machines that work with 1.75 mm filament (we also have ones for the 3.0mm filaments too).

    Select the orientation you need from the drop down menu below

     We are exclusive UK and Ireland distributors and will always carry spares.
    £129.17
  • Bondtech QR 3.0 mm Universal DualDrive extruder

    0 out of 5
    For professionals and demanding hobbyists alike, the Bondtech QR 3.0 mm DualDrive extruder is the one of the best upgrades you can do to your printer. No more underextrusion due to slipping filament! This one is for the machines that work with 2.8-3 mm filament (we also have ones for the 1.75 mm filaments too).

    Select the orientation you need from the drop down menu below

    We are exclusive UK and Ireland distributors and will always carry spares.
    £129.17
  • Mosquito Hotend 1.75mm – Slice Engineering

    0 out of 5

    In Stock!

    The Mosquito Hotend is a deviation from the long established and copied RepRap hotend and heatsink. It is so efficient that printing with temps up to 400C is possible on a standard setup if your thermistor and heater allow it.
    £125.00
  • Bondtech BMG Mounting Bracket – CNC machined

    0 out of 5
    Best way to mount your BMG to anything is with a rigid mount. We are thus offering the official Bondtech CNC machined BMG mounting bracket to match!
    £16.25
  • Bondtech inlet adapter for 4mm PTFE tube

    0 out of 5
    With this adapter you can use the Extruder with a Push-fit for the bowden tube in the groove mount where the Hot-end is located.CNC-machined in aluminium and has an mounted Push-fit connector for 4 mm tube.
    £11.67
  • Bondtech inlet adapter for 6mm PTFE tube

    0 out of 5
    With this adapter you can use the Extruder with a Push-fit for the bowden tube in the groove mount where the Hot-end is located.CNC-machined in aluminium and has an mounted Push-fit connector for 6 mm tube.
    £11.67
  • SC8UU + Igus Drylin RJ4JP-01-08

    0 out of 5
    More stock coming in the new year.One for the 3D printer builders. Why go to the trouble of buying a full SC8UU with substandard bearings inside, only to replace the bearing with one of our IGUS bearings? With the savvy builders in mind we have sourced the SC8UU holders and installed the Drylin Bearings inside for you.
    £3.17