Consumables

  • Techna Enabler-HT – High Temperature Water soluble support filament 0.5kg

    0 out of 5
    Techna Enabler-HT, a very stable yet quickly soluble PVA derivative water soluble support filament. It could arguably be called the ultimate ABS support material. Also compatible with ASA, PETG and some TPU filaments that all require higher printing temperaturesAll spools are transparent 0.5kg and are shipped vacuum packed in ziplock bags with dessicant. Retain packaging for longer shelf life!Select your filament diameter from the drop box
    £26.67£31.67
  • 2x DimaFix Superior 3Dprinting Adhesive cans

    0 out of 5
    This is a 2 can bundle. We are not allowed to send more than 2 at a time for safety. So you use 3DLac for PLA but are struggling with adhesion of ABS and other filaments to your build plate? The solution is DimaFix Spray! Dimafix is a specifically engineered adhesive for use with high temperature beds. Use at 80-90C for best results and then cool down below 60C to snap print of the bed.
    £25.00
  • Chroma ABS – Premium Filament 1.75mm 1kg

    0 out of 5
    If you need more than just PLA to make a tough as well as pretty print, then Chroma ABS 1.75mm - Premium Filament filament may be your choice. Although more demanding to get the temperatures for extrusion and bed adhesion right, ABS has the benefit of allowing easy acetone vapour smoothing and superb toughness to stress. Remember to use these in a well ventilated area!Select your Chroma ABS - Premium Filament 1.75mm 1kg colour from the dropdown menu
    £20.83
  • Chroma PLA – Premium Filament 1.75mm 1kg

    5.00 out of 5
    Chroma PLA Premium Filament 1.75mm 1kg is our own brand premium PLA 1.75mm diameter. No more snapped filament during that long print! Comes on a transparent spools as standard, in a variety of exciting colours. Yes, it is a true 1kg spool! As always free UK shipping included in our price!Select your colour from the drop down menu below. New colours will be available shortly too.
    £20.83
  • Chroma PLA – Premium Filament 2.85mm 1kg

    5.00 out of 5
    Chroma PLA 2.85mm Premium Filament 1kg is our own brand premium PLA 2.85mm diameter. No more snapped filament during that long print! Comes on a transparent spools as standard, in a variety of exciting colours. Yes, it is a true 1kg spool! As always free UK shipping included in our price!Select your colour from the drop down menu below. New colours will be available shortly too.
    £20.83 £16.67
  • 3DLac: 3D Printing Adhesive Spray

    0 out of 5
    3DLac 3Dprinting adhesive spray is the most convenient way of ensuring your prints stick to glass. Works with most filaments too. Best part? it is water soluble so you can just wash it off every so often. 2 quick squirts on you glass bed is all you will need. No more kapton tape, blue masking tape!For better ABS and PETG adhesion try Dimafix
    £14.00
  • DimaFix Superior 3Dprinting Adhesive

    5.00 out of 5
    So you use 3DLac for PLA but are struggling with adhesion of ABS and other filaments to your build plate? The solution is DimaFix Spray! Dimafix is a specifically engineered adhesive for use with high temperature beds. Use at 80-90C for best results and then cool down below 60C to snap print of the bed. Use the other listing if you wish to buy more than 1 can.
    £13.33
  • Chroma ABS – Premium Filament 2.85mm 1kg

    0 out of 5
    If you need more than just PLA to make a tough as well as pretty print, then Chroma ABS 2.85mm- Premium Filament filament may be your choice. Although more demanding to get the temperatures for extrusion and bed adhesion right, ABS has the benefit of allowing easy acetone vapour smoothing and superb toughness to stress. Remember to use these in a well ventilated area!Select your Chroma ABS - Premium Filament 2.85mm 1kg colour from the dropdown menu 
    £20.83 £12.50