Product Tag - 3D printer

  • Zortrax M300 – 3D Printer

    0 out of 5
    One of the daddies of 3D Printing with enlarged workspace that allows printing bigger models as one part. Zortrax M300 are now no longer restricted to using Z-Filaments so you can use our Chroma and Techna ranges. The 3D printer offers one of the highest print qualities by far due to precise repeatability and dimensional accuracy. Side Covers are included as standard!
    £2,583.33 £1,783.33
  • Zortrax m200

    Zortrax M200 – Award Winning 3D Printer

    5.00 out of 5
    The Zortrax M200 has been one of those machines that strives to be as plug &  play as reasonably practical. This was done by restricting filaments to those supplied by Zotrax. Nonetheless this has proven to make the M200 one of the better machines on the market for years. As they are finally able to take 3d party filaments we are glad to include them in our range at last! 
    £1,341.67
  • Bondtech Kit for BCN3D Sigma

    5.00 out of 5
    Own a BCN3D Sigma?Well, now for your convenience, we are offering a Bondtech kit for BCN3D Sigma! The kit includes two extruders (a left hand and a right hand), cables for plug and play and also our own design of mounting hardware. See twitter for ideas on how our friends have used them, or head on over to our blog postThe Kit includes 2 extruders, 2 cables specially made to suit the BCN3D Sigma and of course our own special design of extruder mounting hardware.Get the installation manual here!
    £291.67 £250.00
  • mosquito magnum

    Mosquito MAGNUM Hotend 1.75mm – Slice Engineering

    0 out of 5

    In Stock!

    The Mosquito Magnum Hotend gives you the same output as the Volcano type hotends but in a much smaller envelope. Capable of going up to 450C it really pushes the boundaries of 3D printing.
    £154.17
  • Raise3d kit mainBondtech gear pair

    Bondtech Extruder kit for Raise3D N2 Hybrid

    0 out of 5
    Please be advised, we will not be restocking this kitA much improved and significantly better kit is the Raise3D Dual Direct kitMajor newcomer to the market with some fantastic options, Raise3D, could still benefit from a professionally designed extruding mechanism. We thus offer owners of all Raise3D printers the option of the Bondtech Dual-Drive extruder!Kit contains everything needed to get your printer working reliably and quickly.
    £145.83
  • Mosquito Hotend 1.75mm – Slice Engineering

    0 out of 5

    In Stock!

    The Mosquito Hotend is a deviation from the long established and copied RepRap hotend and heatsink. It is so efficient that printing with temps up to 400C is possible on a standard setup if your thermistor and heater allow it.
    £125.00
  • 3dLac spray advesive

    3DLac: 3D Printing Adhesive Spray

    0 out of 5
    3DLac 3Dprinting adhesive spray is the most convenient way of ensuring your prints stick to glass. Works with most filaments too. Best part? it is water soluble so you can just wash it off every so often. 2 quick squirts on you glass bed is all you will need. No more kapton tape, blue masking tape!For better ABS and PETG adhesion try Dimafix
    £14.00
  • Bondtech inlet adapter for 4mm PTFE tube

    0 out of 5
    With this adapter you can use the Extruder with a Push-fit for the bowden tube in the groove mount where the Hot-end is located.CNC-machined in aluminium and has an mounted Push-fit connector for 4 mm tube.
    £11.67
  • Bondtech inlet adapter for 6mm PTFE tube

    0 out of 5
    With this adapter you can use the Extruder with a Push-fit for the bowden tube in the groove mount where the Hot-end is located.CNC-machined in aluminium and has an mounted Push-fit connector for 6 mm tube.
    £11.67