EML-290 Bench Lathe, 1.5kW Motor and DRO
£2,333.33
Select Currency:They are here! Shipping as of 10th May
Want to get the best performance in your hobby machine shop with a 2 axis Digital Read Out? Have the space for a proper sized lathe? Then this is a perfect machine for you. The EML-290 bench lathe boasts, powered crossfeed, a inverter driven 1.5kW spindle, 3 ratio gearbox and Camlock Chuck!
- Description
- Additional information
- Reviews (1)
Description
This one has a 2 axis Sino DRO with optical scales!
Our first lathe was a dinky little thing with a 750W motor and 300mm between centres. It paid itself off within a couple of years making parts for our flexible oil return hoses, but only after we upgraded the motor to 3-phase and drove it off an inverter. So as you can image we looked hard to find a supplier that would be able to supply a good machine to our spec, and now we have the EML-290 manual lathe. A machine aimed at the serious home workshop with the space and the need for larger diameters and lengths.
The EML-290 boasts a massive 38mm (approx. 1.5″) spindle bore with a MT5 taper, 290mm swing over bed (11.4″) and 700mm (27.5″) between centres. Suffice to say, there is plenty of room for most workpieces on this machine.
As standard, the EML-290 comes with a full package of accessories: Fixed and travelling steadies, dead centres, face plate, 4 jaw chuck, all the tools you would need and of course the key to the CamLock chuck!
Screw cutting is a breeze with this machine as is facing off thanks to the integral screwcutting gearbox and the power crossfeed. The latter runs of a secondary shaft, just like on industrial machines.
We have stock of stands and wedge type quick change tool posts. A DRO can also be supplied fitted or for retrofit upon request.
This machine really does boast some other cool features too, for example it has a dovetailed cross-slide to allow fitment of a rear toolpost, or a vice! It is also ready to accept an auxiliary milling head too.
Obviously, no self respecting turner would tolerate anything less than a lever locking tailstock.
Model | EML-290 (based on SP2129) |
Max. Swing over bed | 290 mm |
Distance between centers | 700mm |
Swing over cross slide travel | 180mm |
Width of bed | 182mm |
Spindle taper | MT5 |
Spindle hole | 38mm |
Range of spindle speed | 50-1800r/min |
Range of cross feed | 0.01~0.10mm/rev |
Range of longitudinal feed | 0.085~0.832mm/rev |
Range of Imperial thread | 8~56T.P.I |
Range of Metric thread | 0.2~3.5mm |
Top slide travel | 65mm |
Cross slide travel | 160mm |
Tailstock quill travel | 70mm |
Taper of tailstock quill | MT3 |
Motor power | 1.5kw – with 1Phase to 3Phase inverter |
Packing Size (L*W*H) | 145*70*68cm |
Net/Gross weight |
260kg/280kg |
Additional information
Weight | 250 kg |
---|
1 review for EML-290 Bench Lathe, 1.5kW Motor and DRO
Add a review
You must be logged in to post a review.
Mark N. (verified owner) –
Really very impressed by this lathe. For the price it has impressive specs and is solidly built. After 7 months I have no complaints. I’ve mainly used it for aluminium alloys and production of plastic parts, but also occasional mild steel work without any trouble or surprises. I have used the 3 jaw chuck most of the time and it is decent quality. I haven’t had cause to use the 4 jaw much in anger yet, but playing with it during testing it seemed pretty good too. DRO is also very useful and works well. The only “maintenance” I have done was to tighten the bolt holding the tool-post down as it had worked loose in-transit and a bit of lubrication and cleaning. Thoroughly recommended. Took me ages to find the bolt to lock the carriage though (it was hiding under the cross slide 🙂 ).
George (store manager) –
Hi Mark!
Thank you for the review. We are glad you are enjoying your machine!